----- HOW TO APPLY FOR CYBERCRIME: -----

***** If you do not run a BBS:

   1) At present, there is only one option - Private Point Node, a self-
      contained BBS software package which receives CCi Mail Packets via
      internet e-mail, allowing you to take part in your network via your
      local hard drive.  Unzip and read the files contained in CCI-PPN.ZIP
      for more information.

***** If you run a Fido-standard (FTS) Front-End Mailer:

   1) Read the requirements for joining in CCI-INFO.TXT, and verify
      that you are able to comply with all of these requirements.

   2) Thoroughly familiarize yourself with the CyberCrime Rules and
      Regulations file, CCI-RULE.TXT.  Be certain you agree to follow
      these rules BEFORE you complete the CCi application.

   3) Fill out the application, CCI-APP.TXT, in it's entirety.

   4) Rename the application to an appropriate name, as outlined at the
      beginning of the application file.

   5) Submit your application, utilizing whichever option you prefer (options
      are laid out in detail at the beginning of the CCI-APP.TXT file).

   6) Once accepted, you will be notified via the method you chose in your
      application.  Note:  If you are unable to be contacted within three
      weeks, your system WILL be removed from the network.

   7) Begin setting up CyberCrime.  Read CCI-SET.TXT for the complete CCi
      setup procedure.  All systems have three weeks to be fully setup within
      the network before they are removed from the nodelist.

***** If you wish to receive your mail packets via E-mail:

   1) It is HIGHLY recommended, unless your system is located outside
      of North America, that you make at LEAST your first two polls
      manually (via the phone lines), as this will enable you and your
      hub to iron out any difficulties as quickly as possible.

      NOTE:  If you ARE planning on polling via e-mail, it is irrelevant
      who or what your local hub is - set all export addresses to 66:100/0.

      NOTE:  If you are running your BBS (or mailer) under Windows 95/NT,
      there ARE utilities available which automate the entire process.
      A fully-setup shareware version of the popular Fido2Internet package
      is available; simply e-mail a request to midsorrow@ice.org

   2) Follow all the procedures as outlined above.  Once complete, read
      CCI-SET.TXT for setup procedures.  Once you have completed setup,
      locate the test message packet that is destined for 66:100/0 (the prefix \
      is almost always the same for 66:100/0, while the extension changes each ]
      time you create a new outbound packet), then e-mail it as an attached
      file to cci-mail@geocities.com  This address is to be used ONLY for
      CyberCrime-related network mail, and not personal communications.

***** If you have a problem, and need assistance, contact Midnight Sorrow,
      (Mitchel Waas), via any of the following contact methods.  He is
      available via voice call from 4pm until 10pm, any day of the week,
      US Eastern Standard Time (GMT minus five hours).

      Via Netmail, Crashmail:   FidoNet......1:369/23
                                InfiNet.....68:9541/0
                                CyberCrime...66:100/0
      Via E-Mail:               midsorrow@ice.org or mwaas@shadow.net
      Via BBS E-Mail:           1-954-316-4663 l/p cybercrime/death
      Voice Call:               1-954-792-3625

Thank you!
 
Midnight Sorrow
CyberCrime OverLord
